D200 User Manual

1. Quick Setup – Power and Connect to Wi-Fi

Step 1 — Power On D200

• Connect D200 to a stable 5V / 2A USB-A power source
• Wait until the Wi-Fi indicator light turns solid (approximately 1 minute)

Step 2 — Connect to the D200 Wi-Fi Network

• Open Wi-Fi settings on your phone, tablet, or laptop
• Select the D200 network (SSID)
• Enter the printed password

The Wi-Fi name (SSID) and password are printed on the back of the device.
Previously connected devices reconnect automatically.

Important

An active data plan is required for cellular internet access.
See Activate Data Service below.

2. Activate Data Service – Data Plan Setup

D200 uses CloudSIM technology. It is not an eSIM device and does not support physical SIM cards.

To access cellular internet, activate a data plan using the GlocalMeIOT app or the device QR code.

While both methods are supported, using the GlocalMeIOT app is recommended for full account and device management:

• Monitor data usage and remaining balance
• Manually switch available carriers where supported
• Confirm device connection status

Step 1 — Install the GlocalMeIOT App

• Download the GlocalMeIOT app from the App Store or Google Play
• Create or log into your account
• Select your country or region (this determines available plans)

If registering with a phone number, the default country selection aligns with your phone number’s country code.

Step 2 — Link Your Device

• Open the app and go to the Device tab
• Scan the QR code printed on the device
• Confirm the device is successfully connected

Step 3 — Purchase a Data Plan

• Go to the Mall tab
• Choose a local, regional, or global data plan
• Complete secure payment inside the app

Available plans vary by country or region.
In select regions, a first-time local 10GB plan may be offered at a promotional rate.

Start Using Data

• Data activates upon purchase or when the device first connects after purchase
• Restart the device (unplug and plug it back in) after purchasing a plan
• Monitor usage and remaining balance inside the app

Plans are prepaid with no contracts or recurring commitments.
Activate immediately — or later, whenever portable internet is needed.

Alternative Activation — QR Code Method

If preferred, data plans can be purchased directly via browser:

• Scan the QR code printed on the device
• Open “Data Mall” in your browser
• Register an account
• Select your country
• Purchase a plan
• Restart the device

3. Important Notes About D200 Connectivity

• D200 operates via CloudSIM (no eSIM or SIM slot)
• The device automatically connects to the strongest available local carrier
• If a local carrier is unavailable, the device may connect through roaming partners where supported
• Restart the device after purchasing data to refresh network registration
• Coverage and available plans vary by region
• USB internet connection is supported on compatible systems

4. Download the GlocalMeIOT App

Download the GlocalMeIOT app from the App Store or Google Play to manage data plans, monitor usage, and link devices. Carrier switching is available where supported.

iOS:

Android:

Alternatively, install the official GlocalMeIOT Android APK (direct download).

5. Official D200 Manual (PDF Download)

For reference, you may download the original manufacturer documentation:

• D200 User Manual (English PDF)
  

Documentation may be updated as software evolves.